The deviation of the conveyor belt from the belt conveyor is a common fault during the operation of the belt conveyor. It not only causes serious wear and tear of the conveyor belt, but also causes sudden accidents such as tearing of the conveyor belt, which causes early failure of the conveyor belt and economic loss. Based on years of practical experience, Wuxi FUDA Vulcanizer Manufacturing Co., Ltd.  has mastered some of the conveyor belt deviation and adjustment rules.

what-should-we-do-if-the-conveyors-conveyor-belt-is-slipped

(1) “Run tight without running loose”: If the front and rear rollers are not parallel during the operation of the belt conveyor, resulting in inconsistent degree of tightness on both sides of the conveyor belt, the conveyor belt is offset to the tight side;

(2) “Run high does not run low”: the supporting roller is not in the same horizontal position parallel to the running direction of the conveyor belt, but is high and low, and the conveyor belt is offset to the high end;

(3) “Before running does not run”: The roller is not on the cross section perpendicular to the running direction of the conveyor belt, but is at one end and one end, then the rear end of the conveyor belt is offset.

We summarize the following methods to solve the conveyor belt deflected:

(1) Roller adjustment method. Generally applicable to the belt conveyor deviation range is not too large, automatically adjusted with the groove type deviation roller, using the conveyor belt “after running not run” regular adjustment, when the conveyor belt deviation, hit the groove type deviation support The small roller on the roller moves forward in the belt running direction due to the friction between the roller and the conveyor belt, and moves backwards on the other side. At this time, the conveyor belt moves toward the back roller side until it returns to normal. position.

(2) Vertical roller offset method. If the conveyor belt always runs sideways, the support roller can be installed vertically on the side of the conveyor belt. On the one hand, due to the force of the vertical roller, the conveyor belt is forcibly reset. On the other hand, due to the friction between the vertical roller and the conveyor belt, the line speed on the side of the conveyor belt is reduced, and the line speed on the other side of the conveyor belt is relatively increased. Until the conveyor belt is reset.

(3) Gravity adjustment method. If the conveyor belt is heavily loaded and run, the roller and idler bracket on the side of the conveyor belt can be properly heightened, so that the weight of the material on the conveyor belt can produce a component force to prevent the conveyor belt from deviating, until the conveyor belt returns to normal. position.

 

Conveyor belt joints and repair

Conveyor belt is the core of the belt conveyor machine, no matter how good the belt conveyor, if the conveyor belt connection is not good, and the conveyor belt damage, will seriously affect the customer experience. Wuxi Fuda Vulcanizer Manufacturing Co., Ltd. specializing in the production of conveyor joints and repair vulcanizing machine, with more than 20 years of production experience, the products throughout the country’s major mining companies and overseas. And get the praise from all the clients.

For conveyor belt joints and repair equipment, please find Wuxi Fuda Vulcanizer Manufacturing Co., Ltd.

conveyor-belt-repair

WUXI FUDA VULCANIZER MANUFACTURING CO., LTD.
Since 2001, as professional we manufacture high quality machines at best price!
Address
: Guangming industrial zone, Xibei town, Wuxi city, Jiangsu Province, China 214194
Mobile & WhatsApp: 86-15995216108      Skype: live:alex-fudamachine
Email: alexmachine@yeah.net & alex-fudamachine@hotmail.com
Website: wuxifuda.en.alibaba.com  &  www.conveyorbeltvulcanizer.com

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

Leave a Reply

电子邮件地址不会被公开。 必填项已用*标注